Shopping Cart

Alpine Rose Garden #57 Another Threads in Bloom  retired, coming out of retirement to be determined.   All stitch instructions can be found in Art of Dimensional Embroidery book by Maria Freitas. Flower and bee instructions are enclosed. Notice some petals and leaves have fallen to the ground. EdMar threads I used: Lola #80 and 86; Iris 44 45 80 and 106; Glory #45 80 113 and 206; for the flowers in the grass use any bright color Glory. EdMar rayon Brazilian embroidery thread is not included in design pkg. Design size 6″ X 5″

BE Rolled Rose Biscornu ~ 2214 Biscornus are interesting little eight-sided cushions that can be used for pincushions whether for jewelry or sewing. The word biscornu is derived from a French adjective meaning skewed quirky or irregular. Biscornu is basically made from two embroidered squares sewn together at points; the corner of one square meets the middle of the other as the two pieces are whip stitched together then stuffed it creates the quirky skewed pillow. You will find them very easy to assemble

Beginner kit ~ Rings of Enchantment ~ #2214BK This Beginner kit includes: fabric print design, Art of Dimensional book, 10 full skeins of thread needed for stitching this design plastic thread organizer and skein threader; package of assorted size Milliner needles and the large #15 Milliner needle are included in package. Rings of Enchantment uses all weights of thread used for Brazilian Embroidery and all basic stitches making it perfect for the beginner; All stitch and flower instructions are found in Art of Dimensional Embroidery book by Maria Freitas. Any change or variation from instructions in the book are enclosed. Design size 7″ X 7″

Bird of Paradise #2182 Inspired by a trip to Hawaii for our 40th anniversary. I just had to paint this dramatic flower in thread. By using Brazilian Embroidery and Stumpwork I was able to layer petals. There are only 3 stitches to achieve these precise petals: stem bullion and buttonhole. Threads you will need ~ Lola 308 and 121; Iris 308 ( 2 skeins) 230 ( 2 skeins) 149 207 130 and 407; Glory 122 and 157; Nova 121 and 207. EdMar rayon thread is not included in pkg. Included in the design package: fabric printed design with instructions for use of those three stitches; muslin backing fabric for working the detached petals and wire. Design size 7″ X 9″

Birthday Bouquet ~ #2105  Birthday Bouquet design was inspired by a birthday card I received from some very special friends.  Be reminded of your special friends as you stitch this piece.  This design is on my ‘favorites’ list.  You will stitch Rolled Roses, Thrift flowers ( those cute little heart shape flowers )  Berry flowers, Princess flowers, Dandy Puffs, Maria’s Rose and a fun little butterfly.  Stitches used:  stem leaves, buttonhole, couching, French knots, bullion and cast-on.  EdMar colors I used:  Lola #007, 99; Iris #99;  Frost #10 and 171; Glory #59, 99, 114, 171, 207.   Other supplies:   Kreinik #8 braid color #26 – amethyst  (  or Glory 407 )  Mill Hill glass beads #62039  or other brand in a frosted creme shade.   You will want your Milliner needles #3, 5 ,7 and 9 or 10 to place the beads;  also the large Milliner #15.  Stitch and most flower instructions are in Art of Dimensional Embroidery by Maria Frietas – additional instruction included.   Design size  6″ X 7″

Blowin’ in the Wind ~ is a free Brazilian Embroidery design from Threads in Bloom, you can print it to trace onto your fabric to stitch. There are only 4 different easy stitches: Stem, satin, Lazy Daisy and French knots. It uses only 3 EdMar threads: Iris and Glory  (I used #50) and Cire´ (I used # 323).

If you need supplies they are available in this E-store:  Fabric department, thread department and needle department.  If you need stitch instructions, the book Art of Dimensional Embroidery is in the book department

Just put Blowin’ in the Wind design in your shopping cart, it will show $0.00, when you check out, there is no s/h for this item only. NO PURCHASE NECESSARY.   Complete order as prompted.  If not ordering any other items, choose manual payment, as if you were mailing a check, you will not be ask to send any money for this item……   I will then email you the copy of the design free of charge.

Enjoy stitching ~ remember “Stitching keeps our souls content”

Brazilian Embroidery motifs #2231 ~ the first in a series of  motifs for book marks for minature cards.  Each is approx  1.5 X 2″.  In this first set of the series there is an Iris flower and Picot flower (Cast-on)  These little motifs take only about an hour to stitch and another 5-10 minutes to complete the book mark, using double sided tape and a dab of glue.  Included in the package are patterns, pictures and instructions for the two motifs, two  6X6″ pieces of fabric to trace the pattern, 2 book marks with an oval cut out to show your embroidery.  The book marks are folded like a card to enclose the embroidery for a nice finish and 2 clear cellophane flap close envelopes to make a nice gift of your book mark.  Stitch and flower instructions are found in Art of Dimensional Embroidery book, by Maria Frietas.  Each book mark has printed proverb ‘Friends are the flowers in the garden of life’

California Rose Bouquet ~ #54 This design has been recently replanted with the new colors. A pretty bow is stitched with Herringbone stitch using Iris 106; the California Rose buds are with Nova the new red & purple #318 which I am growing very fond of and Glory 113; choose a pretty green that you may have a few extra strands of ( I used 80 ) in Lola and Glory; a couple strands of the red and purple for Field flowers. California Rose bud is wrapped cast-on and bullions. Use the new #15 Milliner needle ( find in the needle department ) for the Nova cast-on petals. EdMar rayon thread is not included in pkg. A simple little boquet that everyone likes ~ Stitch instructions are found in Art of Dimensional Embroidery. Flower instructions are included in design package with printed fabric design. Design is 6″ X 3.5″

Color Me #2223 ~ by Threads in Bloom.  Looking for an excuse to get your  own box of Crayons ?   Here it is.  Pick your favorite color to color your vase.  ( the Crayon Carousel is  loaded with the basics and some fun pearls and metallics ).  Outline the vase with matching color or you may want to go wild with a fun contrasting color; then add a colorful bouquet with Iris, Rolled Roses, Cast-on, stems of stock and greenery. The yellow puff can be stitched, using Turkey Work stitch or Punch Needle technique.  Instructions for coloring, setting the color are enclosed, with paper to set the color;  fabric printed design and what flowers I stitched.  Stitch and flower instructions are found in Art of Dimensional Embroidery book, by Maria Freitas.     EdMar threads I used:   Iris #50 and 114;  Lola #219, 323 and 71;  Glory #106 and 323; Ciré #323 and 409.    Design size   3.5 X 4.5

Dancing Iris ~ #2206 One of my favorite flowers to design with and to stitch is the Iris flower… I love this little design.  The Iris does appear to be dancing;  the outstretched leaves are her arms, a ballerina.  Stitch and flower instructions are available in Art of Dimensional Embroidery book by Maria Freitas. Additional information included in package with printed fabric design.  Package also includes the bright color over dye floss for the fun back ground flowers. Thread used: Nova #409; Lola #113; Iris 50 113 and 409; Glory 50 and 409 —- EdMar rayon thread is not included in design pkg design 8″ X 5″

Simplicity gentle lovely is Destiny. The Stump work petals reach out to greet you. Only 3 stitches: Stem straight-satin and buttonhole. As with all Threads in Bloom designs stitch instructions may be found in Art of Dimensional Embroidery by Maria Frietas.. Additional information is enclosed in design package with fabric print muslin backing petal fabric wire for petals stamen Mill Hill beads Needleworx  floss and Gentle Arts floss. EdMar rayon thread is not included in design pkg. Design appx. 3″ x 3.5″

Eloquent ~ 2217 A graceful spray of flowers and berries. The flowers are stitched with Lola and Nova #104; greenery is in Lola #167 Iris #410 and Glory #51; Glory 158 and 128. Little tendrils swirl to add to the grace of this design. Bead berries add a bit of glimmer while the Gentle Art cotton floss buds are a soft contrast. Mill Hill beads and Gentle Art floss are included in the design package with the printed fabric design and instructions. Cream fabric EdMar rayon thread is not included in design pkg. design is 6″ X 4″

Fuchsia & Butterfly ~ 2173 A design of Brazilian Dimensional embroidery and Stumpwork. Use wire to shape the butterfly leaf and 3 stand away petals. A silk ribbon calyx adds another texture to this very dimensional design. Stitch stem couching leaves French knots pistil bullions cast-on satin and buttonhole. Stitch instructions are found in Art of Dimensional Embroidery book. Details for stitch use is enclosed with the fabric print design backing fabric fabric for the detached work wire and silk ribbon. EdMar threads I used: Lola #99 322; Iris #99 and 137; Glory #9 27 99 114 125 201 & 322. Design size 4″ X 4″

Gathering Wreath ~ 2201 *Gathering: To bring or come together ~ Friends *Wreath: An intertwining circle usually of flowers or leaves *Friends: The flowers of our Garden of Life. *Gathering Wreath ~ A group of friends coming together to intertwine their thoughts needs and support for each other. All flowers are done with bullion stitch. Stitch and flower instructions may be found in Art of Dimensional Embroidery by Maria Freitas. Additional and / or variations are enclosed with cream color fabric print. EdMar threads I used: Lola #51, 82, 104 and 118; Iris #51; Glory #51, 82, 59 and #122. EdMar rayon thread is not included in design pkg. Design 6 inches.

Grandiose Mum #011 ~ Whether you call it Royal or Grand the Mum is definitely magnificent. Bullions range from 15 to over 100 wraps giving graceful curves to the petals and a lot dimension. Instructions to easily make these long bullions are included in the design package with the printed fabric design. Instructions for working the stitches will be found in Art of Dimensional Embroidery by Maria Freitas. EdMar thread I used: Lola & Iris #99 Glory #45 and #39 Lola #39 – 2 skeins. You will also want a skein of green cotton floss to match #99 for padding the calyx. EdMar rayon thread is not included in design pkg. Design size 10″ X 7″”"

High Style ~ 2204 High Fashion shoe very easy and fast to stitch will make a lovely gift for your shoe lover friend ( Or YOURSELF ) Uses only 3 stitches: Stem satin and bullion. Stitch instructions may be found in Art of Dimensional book by Maria Frietas. Additional information id enlcosed. Design size 4″ x 5″ For a beautiful red shoe you will want EdMar – Lola #152; Glory #152: Iris #50; Dmc cotton floss #3021; and Mill Hill seed beads #2055-yellow.

Hummingbird & Fuchsia ~ #2103    A design being revisited, from a few years ago, it remains one of my favorites.  Just about everyone likes Hummingbird.  My tiny bird with a Stump work technique ‘in flight’ wing is about to get some sweet nectar from a colorful Fuchsia.  Stitch instructions are found in Art of Dimensional Embroidery book, by Maria Freitas.  Flower and Hummingbird instructions are included with petite bead for the eye, #9 or 10 milliner needle, wire and felt needle lace pad to work the wing on.  The ‘in flight’ wing is really quite easy to stitch.  Design size is 6″ X 7″   Stitches are   stem, leaves, couching, bullion, cast-on, detached buttonhole, buttonhole and French knots.   EdMar thread I used:  Lola #215 and #315;  Iris #50, 130, 131 and 315;  Ciré $328;  Nova #143  and Glory #50, 206 and 328.

Hydi ~ 2197 Notice the little worm nibbling on the leaf . Brazilian Embroidery and Stump work. Hydrangea is a mix of colors on one huge lovely bloom. Stitches used: stem couching French knots buttonhole bullion and straight. Stitch instructions are found in “Art of Dimensional Embroidery” by Maria Freitas additional instructions are enclosed with wire for Stump work leaves and butterfly. Threadworx and Gentle Arts floss are included wool felt prepared bonded fabric muslin backing and of course printed fabric. EdMar thread I used: Lola #40 and #327; Iris #40; Glory #40 and 206. EdMar thread is not included in design pkg Design size 3.5 x 3

Its-a-Belle #2216 ~ This is a design I taught one year at the Nordic Needle Stitcher’s Retreat.  One of my best friends, Isabelle, collects bells, this was also for her.  To be taught for beginners in Brazilian Embroidery with a sample of Stumpwork.  You will stitch:  stem stitch, couching, French knots, Cast-on, bullions and buttonhole.  Use Lola, Iris, Nova, Ciré  and Glory with beads for the berries and the bell clapper.  EdMar threads I used:  Lola – 054, 153; Nova #153; Iris #50; Ciré #125 and Glory #50, 006, 113 and 153.  Glass beads are included in the design package with wire for the Stumpwork leaf.  Stitch and flower instructions are found in Art of Dimensional Embroidery book, by Maria Frietas .  Additional instructions included with printed fabric design.  Design size  approx  4X5″

Just Picked #63 Imagine you just came in from your flower garden with this basket of Just Picked lovely flowers. Can you smell the fragrance? This is a nice sampler of stitches and texture. Stitch and flower instructions ( except for the yellow Asters ) are found in Art of Dimensional Embroidery by Maria Freitas. Instructions for Asters are enclosed using a Punch Needle. Instructions for using Punch Needle are in Punch Needle package when purchased. It is easy and fun if you have not experienced Punch Needle. Design size 8

Kalmya ~ #2219 Another Threads in Bloom ‘evening’ design -  I enjoy this little flower.   My  Kalmya is a rendition of the  Kalmia flower in Apples to Zinnas book, by Maria Freitas.  You will find the flower and stitch instructions in the book – with my changes in your design package, along with the fabric printed design and amber color glass seed beads.  Apples to Zinnas is in the ‘book’ category of this store.  I used Iris #305; Glory #51, 114 & 122  and Frost #96.

Stitches:   Stem, couching, straight, French knots and Cast-on Double

Design size is   2.5” X 4

Lily ~ is a free Brazilian Embroidery design from Threads in Bloom, you can trace onto your fabric to stitch.  Uses stitches: Stem, satin, Knotted cast-on and French knots. EdMar threads I used : Lola, Iris and Glory  #215; Glory #106 & 120; Nova #106;      Gentle Art floss for leaves is  Tiger Lily

Other supplies:  Milliner needles #1 or 3,  5, 7 and #15;  Trigger fabric and  hoop

If you need supplies they are available in this E-store:  Fabric department, thread department and needle department.  If you need stitch instructions, the book Art of Dimensional Embroidery is in the book department

Just put Blowin’ in the Wind design in your shopping cart, it will show $0.00, when you check out, there is no s/h for this item only. NO PURCHASE NECESSARY.   Complete order as prompted.  If not ordering any other items, choose manual payment, as if you were mailing a check, you will not be ask to send any money for this item……   I will then email you the copy of the design free of charge.

Enjoy stitching ~ remember “Stitching keeps our souls content”

Madison ~ #2169 A stylized frame you can add a verse names dates or a picture in the center. Little beads accent the scalloped edge of the frame with eye catching Madison Rose flowers around the inner edge that spring to life in this lovely design. The frame gives you some practice with satin stitch (allow 2 skeins of Iris 172 ); the bullion scallop edge is Lola #172. Madison Rose flowers are bullions and cast-on stitch with Lola #301 and 400; other EdMar thread I used: Iris 413; Glory #172 218 and 413. Stitch instructions are in Art of Dimensional Embroidery book. Additional instructions are enclosed in package with the fabric print design. Design size 6″ X 4″

Mary’s St John’s Wort Bouquet #2218 ~  A friend, Mary, ask me to create a design with a St. John’s Wort for her to teach at the Brazilian Embroidery Seminar, this is the design I created.  The petals are padded with felt, covered with long & short satin stitches; the center is a Cat’s eye glass bead, with loops around the bead ( included in the design package with Gentle Arts floss)  Other flowers included in the bouquet are:  Iris flower, Kalmia and Double row Picot – all with variations of Cast-on stitch.  Stitch and flower instructions are found in Art of Dimensional Embroidery book and Apples to Zinnias, both by Maria Frietas. Design package includes fabric printed design, additional instructions for any variations from the  books and for St. John’s Wort, Gentle Arts floss and beads.  Design size  6″ X 5″

Mendocino Butterfly and Roses ~ 2203 Inspired by a Butterfly fluttering around some roses in my back yard; I knew I wanted the roses bold yet frilly. The Butterfly had to be irridescent. Stitch insturctions may be found in Art of Dimensional Embroidery by Maria Freitas. The design package includes: printed design fabric printed fabric for butterfly wings wire instructions for March Rose and Butterfly. EdMar thread I used: Iris #50; Lola #004 135 and 206; Glory #50 153 and 206. DMC floss: cotton floss #3847; DMC Light effects # E135 and E3849. Design size 4 X 4

Miss Tia Potts ~ #2220 Introducing the star of the season Miss Tia Potts. Everyone will be talking about her with the Swarovski crystal jewels her stylish silk and Japan red around her middle. Look at those lovely bright flowers to cheer the season. You really must stitch Miss Tia Potts she is the socialite of the year. Miss Tia Potts design package does include the Swarovski crystals Kreinik Serica silk and Kreinik Japan red thread. Stitch and flower instructions are found in Art of Dimensional Embroidery by Maria Frietas; additional instructions are included in the package with the fabric print design. Design size is approx 5″ X 5″ EdMar thread used – order separately: Lola #101 220 400 106 & 153; Iris #101 114 and #50; Glory #101 50 210 114 & 210. Additional needs: Assorted size Milliner needles hoop embroidery scissors and glue.

Nordic Rose ~ #2212 Roses stitched with Nova using the large #15 Milliner needle makes this a design to stitch in a few hours. Beginning stitchers do not hesitate – Cast-on stem couching and French knots are stitches used. Thread is Nova ( I used #008 ) Lola #50; Iris 50 and 59; Glory #50 113 and 103 for the pretty blue Wisteria stock. Stitch instructions are found in Art of Dimensional Embroidery book by Maria Freitas other instructions are included in design package with printed fabric design. EdMar rayon Brazilian embroidery thread is not included in the design pkg. Design size approx 3.5″ X 4″

Opposites fit Together ~ #2226 My version of Yin Yang.   Did you know the Symbol Yin Yang  represents the ancient Chinese understanding of how things work ?  Palestrina knot stitched with Lola (#71) encircles and divides the sides; flowers are stitched with Lola (#135) using bullions, cast-on and wrapped cast-on, the centers are with Glory #114;  greenery is Iris #50 (allow 2 skeins) and Glory #50.  Stitch instructions are found in Art of Dimensional Embroidery by Maria Freitas; flower instructions are enclosed with the fabric print design.  Design size is 4.75″

Rings of Enchantment ~ #2214 Rings of Enchantment uses all weights of thread used for Brazilian Embroidery and all basic stitches making it perfect for the beginner; with enough interest for the experienced stitcher. All stitch and flower instructions are found in Art of Dimensional Embroidery book by Maria Freitas. Any change or variation from instructions in the book are enclosed. EdMar rayon Brazilian embroidery thread is not included in this design pkg For complete kit with thread go to the BEGINNER KIT Design size 7″ X 7″

Rolled Rose Scissor Fob ~ #2210 Scissor fobs are not only pretty and practical they are fun and certainly make a lovely gift. A COMPLETE KIT: Zweigart banding, stabilizer, Milliner needle, ribbon, jewelry finding, stuffing, Gentle Art floss and EdMar thread with instructions to stitch and finish this pretty fob to attach your favorite scissors. Kit is available in Persimmon (shown ) or Purple Iris. Featured in “at home with Needlework” magazine September 2009.

Romantic Heart ~ #65 Rolled Roses are one of my favorite flowers to stitch. I prefer to stitch Rolled Roses  with Ciré with mini roses stitched with Glory.  Cascades of ‘fern’ assist to form the heart.  The fern is stitched with cotton overdye Threadworx floss, included in the design package with the fabric print design.  Stitch and flower instructions are found in Art of Dimensional Embroidery, in the book department.  EdMar thread I used:  Iris #50; Glory #45 & 409; Ciré # 409     Design size 5″ X 5″

Roses and Ribbons ~#2179 The focus of a zippered clutch bag. Pattern and instructions for completing the clutch is included with 2 transferable patterns. (fabric is not included in this package) Stitch instructions may be found in Art of Dimensional Embroidery book by Maria Freitas. Use of stitches is enclosed. EdMar thread I used: Ribbon is Glory 313 – you will need one skein; greenery is Iris and Glory #53; flowers are Lola #004 and 008; and Glory #409. EdMar rayon Brazilian embroidery thread is not included in the design pkg.

Savannah Sweet Pea ~ #2191 Brazilian and Stump work. Stitch instructions may be found in “Art of Dimensional Embroidery” by Maria Freitas. Flower instructions are enclosed with fabric print design muslin backing prepared fabric for detached petal and wire along with Kreinik silk floss in pink white and lavender. EdMar thread I used: Lola Iris and Glory #410; Iris #004. EdMar rayon Brazilian emberoidery thread is not included in design pkg Design 4 x 3

Serenity ~ N62 A fun “Evening” design not only quick to stitich also easy. This time I stitched it with one of my favorite flowers – Camellia. Serenity is the perfect size for a “gift” card or small frame. It will make a lovely sachet pillow to. Threads I used: Iris and Glory #51; Lola #134; Glory #407 & 220. I have included Threadworx  cotton floss in the design package with the fabric print. Other nice Camellia colors are white #000; whisper shaded fuchsia #18; #135 soft pink or #43 light fuchsia. EdMar rayon Brazilian embroidery thread is not included in design pkg. Design size is 4 ” X 3″ As with all Threads in Bloom designs – stitch instructions may be found in “Art of Dimensional Embroidery by Maria Freitas. Camellia instructions are included in package.  The tri-fold Gift Cards with cut out to show your needlework is available in the Toys and Accessory department of store.

Sonoma ~ Iris and Autumn Rose an abstract cirlce features two size of Iris; one stitched with Ciré, the others with Nova.  Autumn Rose uses Lola & Glory. Stitches used; stem, satin, French knot, bullion and cast-on.    Stitch instructions may be found in Art of Dimensional Embroidery book, by Maria Freitas, along with the Iris Flower instructions.  Autumn Rose is a Threads in Bloom flower, instructions are enclosed in this package with the printed fabric design.

Design is approx. 4” X 5

EdMar rayon twisted thread I used:  Iris #51, 40 & 315;  Glory   #51 &  114;     Nova  #34 & 219;   Lola #119 & 218  Ciré  # 320;

To Begin With and Butterfly ~ uses all basic Brazilian Embroidery stitches plus some easy Stump Work techniques. I have stitched with five of the seven weights / types of EdMar thread. This design was developed for the beginning class I taught at our local Jr. College however it also has interest for an experienced stitcher. Stitch instructions and some flower instructions are found in Art of Dimensional Embroidery book by Maria Freitas. Other instructions are enclosed with: fabric print design muslin backing wire and prepared bonded fabric for stitching detached petals and Butterfly. Design 6″ x 4″

EdMar theads: Nova #216 314 & 320; Lola #314, 215, 121, 50 & 114; Ciré #404; Iris #53, 50, 114, 215, 308, 312 & 400;  Glory 50, 158, 206, 219, 230 & 314

Trillium ~ #10 Brazilian Embroidery and Stump work. I like the way Stump work and Brazilian Embroidery compliment each other. Here Stump work is stitched on separate fabric from the design. There are 2 stitches used for the petals: Buttonhole and satin. The shape ( petal leaf etc. ) is formed with a piece of wire; after stitching cut around the edge of the wire and attached to your design piece. The wire frame allows you to shape and contour your petal giving dimensional life to your needle art. The greenery is stem stitch and satin. Trillium design package includes the printed fabric design additional fabric for the detached petals wire and instructions for the Stump work Trillim. Stitch instructions are found in Art of Dimensional Embroidery book. Design size is about 5″ X 3″ EdMar rayon Brazilian embroidery thread is not included in design pkg

Zinnia Wreath ~ #2208 Zinnias are fun because you can stitch them in bright colors. I have made a wreath with hemp cord woven into the wreath.  And, it wouldn’t be complete without an iridescent Butterfly. Stitch instructions will be found in Art of Dimensional Embroidery book, by Maria Freitas.  Instructions for using the stitches to do the Zinnia and Butterfly are enclosed in the design package with the printed fabric design,  wire and fabric for the Stump Work Butterfly and the hemp cord.  Design is approx  6”

EdMar thread I used:    Lola   #210, 315; Iris  #410, 009,  74,  106,  152  and  220; Glory  #129

DMC floss I used:  Outline of Butterfly wings  – cotton floss  #3847                Wings – fill in  – Jewel Effects  #E135